VACUUM — garbage-collect and optionally analyze a database
VACUUM [ (option
[, ...] ) ] [table_and_columns
[, ...] ] VACUUM [ FULL ] [ FREEZE ] [ VERBOSE ] [ ANALYZE ] [table_and_columns
[, ...] ] whereoption
can be one of: FULL [boolean
] FREEZE [boolean
] VERBOSE [boolean
] ANALYZE [boolean
] DISABLE_PAGE_SKIPPING [boolean
] SKIP_LOCKED [boolean
] INDEX_CLEANUP { AUTO | ON | OFF } PROCESS_MAIN [boolean
] PROCESS_TOAST [boolean
] TRUNCATE [boolean
] PARALLELinteger
SKIP_DATABASE_STATS [boolean
] ONLY_DATABASE_STATS [boolean
] BUFFER_USAGE_LIMITsize
andtable_and_columns
is:table_name
[ (column_name
[, ...] ) ]
VACUUM
reclaims storage occupied by dead tuples.
In normal PostgreSQL operation, tuples that
are deleted or obsoleted by an update are not physically removed from
their table; they remain present until a VACUUM
is
done. Therefore it's necessary to do VACUUM
periodically, especially on frequently-updated tables.
Without a table_and_columns
list, VACUUM
processes every table and materialized view
in the current database that the current user has permission to vacuum.
With a list, VACUUM
processes only those table(s).
VACUUM ANALYZE
performs a VACUUM
and then an ANALYZE
for each selected table. This
is a handy combination form for routine maintenance scripts. See
ANALYZE
for more details about its processing.
Plain VACUUM
(without FULL
) simply reclaims
space and makes it
available for re-use. This form of the command can operate in parallel
with normal reading and writing of the table, as an exclusive lock
is not obtained. However, extra space is not returned to the operating
system (in most cases); it's just kept available for re-use within the
same table. It also allows us to leverage multiple CPUs in order to process
indexes. This feature is known as parallel vacuum.
To disable this feature, one can use PARALLEL
option and
specify parallel workers as zero. VACUUM FULL
rewrites
the entire contents of the table into a new disk file with no extra space,
allowing unused space to be returned to the operating system. This form is
much slower and requires an ACCESS EXCLUSIVE
lock on
each table while it is being processed.
When the option list is surrounded by parentheses, the options can be written in any order. Without parentheses, options must be specified in exactly the order shown above. The parenthesized syntax was added in PostgreSQL 9.0; the unparenthesized syntax is deprecated.
FULL
Selects “full” vacuum, which can reclaim more space, but takes much longer and exclusively locks the table. This method also requires extra disk space, since it writes a new copy of the table and doesn't release the old copy until the operation is complete. Usually this should only be used when a significant amount of space needs to be reclaimed from within the table.
FREEZE
Selects aggressive “freezing” of tuples.
Specifying FREEZE
is equivalent to performing
VACUUM
with the
vacuum_freeze_min_age and
vacuum_freeze_table_age parameters
set to zero. Aggressive freezing is always performed when the
table is rewritten, so this option is redundant when FULL
is specified.
VERBOSE
Prints a detailed vacuum activity report for each table.
ANALYZE
Updates statistics used by the planner to determine the most efficient way to execute a query.
DISABLE_PAGE_SKIPPING
Normally, VACUUM
will skip pages based on the visibility map. Pages where
all tuples are known to be frozen can always be skipped, and those
where all tuples are known to be visible to all transactions may be
skipped except when performing an aggressive vacuum. Furthermore,
except when performing an aggressive vacuum, some pages may be skipped
in order to avoid waiting for other sessions to finish using them.
This option disables all page-skipping behavior, and is intended to
be used only when the contents of the visibility map are
suspect, which should happen only if there is a hardware or software
issue causing database corruption.
SKIP_LOCKED
Specifies that VACUUM
should not wait for any
conflicting locks to be released when beginning work on a relation:
if a relation cannot be locked immediately without waiting, the relation
is skipped. Note that even with this option,
VACUUM
may still block when opening the relation's
indexes. Additionally, VACUUM ANALYZE
may still
block when acquiring sample rows from partitions, table inheritance
children, and some types of foreign tables. Also, while
VACUUM
ordinarily processes all partitions of
specified partitioned tables, this option will cause
VACUUM
to skip all partitions if there is a
conflicting lock on the partitioned table.
INDEX_CLEANUP
Normally, VACUUM
will skip index vacuuming
when there are very few dead tuples in the table. The cost of
processing all of the table's indexes is expected to greatly
exceed the benefit of removing dead index tuples when this
happens. This option can be used to force
VACUUM
to process indexes when there are more
than zero dead tuples. The default is AUTO
,
which allows VACUUM
to skip index vacuuming
when appropriate. If INDEX_CLEANUP
is set to
ON
, VACUUM
will
conservatively remove all dead tuples from indexes. This may be
useful for backwards compatibility with earlier releases of
PostgreSQL where this was the
standard behavior.
INDEX_CLEANUP
can also be set to
OFF
to force VACUUM
to
always skip index vacuuming, even when
there are many dead tuples in the table. This may be useful
when it is necessary to make VACUUM
run as
quickly as possible to avoid imminent transaction ID wraparound
(see Section 25.1.5). However, the
wraparound failsafe mechanism controlled by vacuum_failsafe_age will generally trigger
automatically to avoid transaction ID wraparound failure, and
should be preferred. If index cleanup is not performed
regularly, performance may suffer, because as the table is
modified indexes will accumulate dead tuples and the table
itself will accumulate dead line pointers that cannot be removed
until index cleanup is completed.
This option has no effect for tables that have no index and is
ignored if the FULL
option is used. It also
has no effect on the transaction ID wraparound failsafe
mechanism. When triggered it will skip index vacuuming, even
when INDEX_CLEANUP
is set to
ON
.
PROCESS_MAIN
Specifies that VACUUM
should attempt to process the
main relation. This is usually the desired behavior and is the default.
Setting this option to false may be useful when it is only necessary to
vacuum a relation's corresponding TOAST
table.
PROCESS_TOAST
Specifies that VACUUM
should attempt to process the
corresponding TOAST
table for each relation, if one
exists. This is usually the desired behavior and is the default.
Setting this option to false may be useful when it is only necessary to
vacuum the main relation. This option is required when the
FULL
option is used.
TRUNCATE
Specifies that VACUUM
should attempt to
truncate off any empty pages at the end of the table and allow
the disk space for the truncated pages to be returned to
the operating system. This is normally the desired behavior
and is the default unless the vacuum_truncate
option has been set to false for the table to be vacuumed.
Setting this option to false may be useful to avoid
ACCESS EXCLUSIVE
lock on the table that
the truncation requires. This option is ignored if the
FULL
option is used.
PARALLEL
Perform index vacuum and index cleanup phases of VACUUM
in parallel using integer
background workers (for the details of each vacuum phase, please
refer to Table 28.45). The number of workers used
to perform the operation is equal to the number of indexes on the
relation that support parallel vacuum which is limited by the number of
workers specified with PARALLEL
option if any which is
further limited by max_parallel_maintenance_workers.
An index can participate in parallel vacuum if and only if the size of the
index is more than min_parallel_index_scan_size.
Please note that it is not guaranteed that the number of parallel workers
specified in integer
will be
used during execution. It is possible for a vacuum to run with fewer
workers than specified, or even with no workers at all. Only one worker
can be used per index. So parallel workers are launched only when there
are at least 2
indexes in the table. Workers for
vacuum are launched before the start of each phase and exit at the end of
the phase. These behaviors might change in a future release. This
option can't be used with the FULL
option.
SKIP_DATABASE_STATS
Specifies that VACUUM
should skip updating the
database-wide statistics about oldest unfrozen XIDs. Normally
VACUUM
will update these statistics once at the
end of the command. However, this can take awhile in a database
with a very large number of tables, and it will accomplish nothing
unless the table that had contained the oldest unfrozen XID was
among those vacuumed. Moreover, if multiple VACUUM
commands are issued in parallel, only one of them can update the
database-wide statistics at a time. Therefore, if an application
intends to issue a series of many VACUUM
commands, it can be helpful to set this option in all but the last
such command; or set it in all the commands and separately
issue VACUUM (ONLY_DATABASE_STATS)
afterwards.
ONLY_DATABASE_STATS
Specifies that VACUUM
should do nothing except
update the database-wide statistics about oldest unfrozen XIDs.
When this option is specified,
the table_and_columns
list must be empty, and no other option may be enabled
except VERBOSE
.
BUFFER_USAGE_LIMIT
Specifies the
Buffer Access Strategy
ring buffer size for VACUUM
. This size is used to
calculate the number of shared buffers which will be reused as part of
this strategy. 0
disables use of a
Buffer Access Strategy
. If ANALYZE
is also specified, the BUFFER_USAGE_LIMIT
value is used
for both the vacuum and analyze stages. This option can't be used with
the FULL
option except if ANALYZE
is
also specified. When this option is not specified,
VACUUM
uses the value from
vacuum_buffer_usage_limit. Higher settings can
allow VACUUM
to run more quickly, but having too
large a setting may cause too many other useful pages to be evicted from
shared buffers. The minimum value is 128 kB
and the
maximum value is 16 GB
.
boolean
Specifies whether the selected option should be turned on or off.
You can write TRUE
, ON
, or
1
to enable the option, and FALSE
,
OFF
, or 0
to disable it. The
boolean
value can also
be omitted, in which case TRUE
is assumed.
integer
Specifies a non-negative integer value passed to the selected option.
size
Specifies an amount of memory in kilobytes. Sizes may also be specified
as a string containing the numerical size followed by any one of the
following memory units: B
(bytes),
kB
(kilobytes), MB
(megabytes),
GB
(gigabytes), or TB
(terabytes).
table_name
The name (optionally schema-qualified) of a specific table or materialized view to vacuum. If the specified table is a partitioned table, all of its leaf partitions are vacuumed.
column_name
The name of a specific column to analyze. Defaults to all columns.
If a column list is specified, ANALYZE
must also be
specified.
When VERBOSE
is specified, VACUUM
emits
progress messages to indicate which table is currently being
processed. Various statistics about the tables are printed as well.
To vacuum a table, one must ordinarily be the table's owner or a
superuser. However, database owners are allowed to
vacuum all tables in their databases, except shared catalogs.
(The restriction for shared catalogs means that a true database-wide
VACUUM
can only be performed by a superuser.)
VACUUM
will skip over any tables that the calling user
does not have permission to vacuum.
VACUUM
cannot be executed inside a transaction block.
For tables with GIN indexes, VACUUM
(in
any form) also completes any pending index insertions, by moving pending
index entries to the appropriate places in the main GIN index
structure. See Section 72.4.1 for details.
We recommend that all databases be vacuumed regularly in order to remove dead rows. PostgreSQL includes an “autovacuum” facility which can automate routine vacuum maintenance. For more information about automatic and manual vacuuming, see Section 25.1.
The FULL
option is not recommended for routine use,
but might be useful in special cases. An example is when you have deleted
or updated most of the rows in a table and would like the table to
physically shrink to occupy less disk space and allow faster table
scans. VACUUM FULL
will usually shrink the table
more than a plain VACUUM
would.
The PARALLEL
option is used only for vacuum purposes.
If this option is specified with the ANALYZE
option,
it does not affect ANALYZE
.
VACUUM
causes a substantial increase in I/O traffic,
which might cause poor performance for other active sessions. Therefore,
it is sometimes advisable to use the cost-based vacuum delay feature. For
parallel vacuum, each worker sleeps in proportion to the work done by that
worker. See Section 20.4.4 for
details.
Each backend running VACUUM
without the
FULL
option will report its progress in the
pg_stat_progress_vacuum
view. Backends running
VACUUM FULL
will instead report their progress in the
pg_stat_progress_cluster
view. See
Section 28.4.5 and
Section 28.4.2 for details.
To clean a single table onek
, analyze it for
the optimizer and print a detailed vacuum activity report:
VACUUM (VERBOSE, ANALYZE) onek;
There is no VACUUM
statement in the SQL standard.